BCMGW - HI HEAT ALUMINUM PAINT,1206

  • MSDS: BCMGW
  • Manufacturer: COWMAN CAMPBELL PAINT CO
  • Product Name: HI HEAT ALUMINUM PAINT,1206
  • National Stock Number: 8010-00N006229
Product Identification

Product ID:HI HEAT ALUMINUM PAINT,1206
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006229
MSDS Number: BCMGW

Responsible Party
COWMAN-CAMPBELL PAINT CO

Emergency Phone: 206-783-8835

Cage: HO230

Contractor
COWMAN-CAMPBELL PAINT CO
SEATTLE, WA 98107 US

Cage: HO230

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 35%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 21%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:EYE/SKIN:IRRITATION. VAPOR:CNS
DEPRESSION,COORDINATION LOSS. IMPAIR
JUDGEMENT,STUPOR,UNCONSCIOUSNESS

First Aid

First Aid:EYE:FLUSH WITH WATER 15 MINUTES,CALL PHYSICIAN.SKIN:REMOVE
CONTAMINATED CLOTHING,FLUSH AREA WITH WATER UNTIL IRRIT SUBSIDES.
INHALATION:REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CONSULT
PHYSICIAN . INGESTION:DO NOT INDUCE VOMIT,CALL PHYSICIAN

Fire Fighting

Flash Point:81F/27C
Lower Limits:1.0
Extinguishing Media:DRY CHEMICAL,FOAM,WATER FOG
Fire Fighting Procedures:SELF-CONTAIN BREATH APP, WATER FOG TO COOL
EXPOSED CONTAINER
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE FROM
PRESSURE BUILD UP WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SECURE IGNITION SOURCES,VENTILATE AREA,KEEP
PEOPLE AWAY. RECOVER FREE LIQUID,CONTAIN SPILL.ADD ABSORBENT AND
PICK UP WITH NON-SPARKING TOOLS. AVOID BREATHING VAPORS.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
STORE AWAY FROM HEAT OR FLAME OR STORAGE OXIDIZERS. USE WITH
ADEQUATE VENTILATION,AVOID BREATHING VAPORS.
Other Precautions:GROUND CONTAINERS WHEN POURING,AVOID FREE FALL OF
LIQUID IN EXCESS OF A FEW INCHES. DO NOT SMOKE,EAT, WELD,FLAME CUT
IN AREA OF USE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL WITH EXPLOSION PROOF MOTORS.
Protective Gloves:CHEM RESISTANT
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:FACE SHIELD,CHEM RESISTANT APRON,COVERALLS.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:279F/137C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:71

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Hazardous Decomposition Products:CARBON MONOXIDE

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.